Convert images (PNG, JPG) to laser G-code

Logos, drawings and photos all work: GCodely either traces the image into clean vector paths or engraves it line by line as a raster image. Drop a PNG or JPG into the converter above to start.

Logos and line art: vector engraving

For black-and-white motifs GCodely traces the image into smooth vector shapes (Potrace method, own implementation) and fills them with contours or hatching – sharp edges, no pixel steps. Threshold, contrast and speck removal clean up the input first.

Photos: raster engraving with dithering

Photos are engraved line by line. Choose Floyd-Steinberg, Jarvis-Judice-Ninke, Stucki or Atkinson dithering, halftone dots or grayscale via laser power. Line spacing follows the resolution you set in px/mm.

Preview before you burn

See every path and travel move, play back the order and get a time estimate including acceleration. Export is blocked if anything would leave your work area.

How it works

  1. Drop a PNG or JPG into the converter above.
  2. Adjust contrast and threshold (logos) or keep grayscale (photos), and set the size in mm.
  3. Choose a strategy – concentric/hatch for logos, raster engraving for photos – and export.

Guides

Frequently asked questions

What image resolution do I need?
For logos, the sharper the better; small blurry images give wobbly edges. For raster engraving, the resolution in px/mm sets the line spacing – about 10 px/mm (0.1 mm) suits most diode lasers.
Which dithering is best for photos?
Floyd-Steinberg is a good start. Jarvis-Judice-Ninke and Stucki give smoother gradients, Atkinson more contrast. Try a small test on your material.
Can I convert a JPG to SVG first?
Not necessary – GCodely vectorizes the image internally. The vector view in the converter shows the traced result.